Genuine Milwaukee Tools - Drill Presses
Drill Presses

Drill Presses

Sort By:
Adjustable Position Electromagnetic Drill Press with 1/2 in. Motor  (SKU: 4204-1)Adjustable Position Electromagnetic Drill Press with 1/2 in. Motor (SKU: 4204-1)This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Adjustable Position Electromagnetic Drill Press with 3/4 in. Motor  (SKU: 4206-1)Adjustable Position Electromagnetic Drill Press with 3/4 in. Motor (SKU: 4206-1)This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Adjustable Position Electromagnetic Drill Press with No. 3 MT Motor  (SKU: 4208-1)Adjustable Position Electromagnetic Drill Press with No. 3 MT Motor (SKU: 4208-1)This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Adjustable Position Electromagnetic Drill Press with No. 3 MT Motor  (SKU: 4209-1)Adjustable Position Electromagnetic Drill Press with No. 3 MT Motor (SKU: 4209-1)This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Compact Electromagnetic Drill Press - 450 RPM  (SKU: 4270-20)Compact Electromagnetic Drill Press - 450 RPM (SKU: 4270-20)For remote drilling in metal, the 4270-20 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools. Includes Lubricant Spray Bottle, Nylon Safety Strap, Two Hex Wrenches.
Compact Electromagnetic Drill Press Kit - 450 RPM  (SKU: 4270-21)Compact Electromagnetic Drill Press Kit - 450 RPM (SKU: 4270-21)For remote drilling in metal, the 4270 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools. Includes Lubricant Spray Bottle, Nylon Safety Strap, Two Hex Wrenches.
Fixed Position Electromagnetic Drill Press with 3/4 in. Motor  (SKU: 4210-1)Fixed Position Electromagnetic Drill Press with 3/4 in. Motor (SKU: 4210-1)This combination unit features the 4202 fixed position variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Copyright © Biedler & Biedler Ventures Columbus, IN 
support@biedlers.com

Thumbnails powered by Thumbshots